Parker Hale Enfield lock Plate side nails?

Message

#11 Post by **dromia** » Sun Sep 25, 2016 3:25 pm

I sent you a pm Dave.

#12 Post by **Alpha1** » Sun Sep 25, 2016 3:50 pm

#13 Post by **Alpha1** » Mon Oct 03, 2016 1:15 pm

The thread you are looking for is 7/32x26 TPI. Unfortunately we don't have a tap in that size.
But if you google Tracy tools and look on the witworth page they have them in stock. The other threaded holes on the lock plate are 3/16x26 TPI. If I was tapping it I would start with a taper tap then run it through with a second tap.

If you had a 7/32x36 TPI Die nut you would be able to recreate the side nails.

#14 Post by **dromia** » Mon Oct 03, 2016 1:25 pm

Thanks Dave I have ordered the taps, dies were out of stock.

#15 Post by **glevum** » Thu Oct 06, 2016 9:21 am

Hi,

Have you tried RDG tools?

They stock 7/32 x 26tpi dies

http://www.rdgtools.co.uk/cgi-bin/sh000 ... ml#SID=526

The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Parker Hale Enfield lock Plate side nails?

Re: Parker Hale Enfield lock Plate side nails?

Re: Parker Hale Enfield lock Plate side nails?

Re: Parker Hale Enfield lock Plate side nails?

Re: Parker Hale Enfield lock Plate side nails?

Re: Parker Hale Enfield lock Plate side nails?

Who is online