GM3 and 357 Mag reloading
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Duey
- Site Supporter 2021
- Posts: 343
- Joined: Thu Feb 11, 2016 6:33 pm
- Home club or Range: Offas Dyke, Pickering, North Cotes Butts and Grove small arms
- Location: Brookenby, Lincolnshire
- Contact:
Re: Load Data
In fact look down about 6 posts below this one
-
dromia
- Site Admin
- Posts: 19980
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Load Data
Or follow the link in my second post.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
dodgyrog
- Site Supporter Since 2015
- Posts: 4096
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: Load Data
You can lead a horse to water --------!dromia wrote:Or follow the link in my second post.
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
ukrifleman
- Past Supporter
- Posts: 728
- Joined: Thu Jun 07, 2012 7:26 pm
- Contact:
Re: Load Data
The GM3 load posted earlier refers to .357 loads used in a lever action rifle NOT.38 special.Lever357 wrote:Bought my reloading gear last week at the shooting show and the powder I got is Vectan GM3. This is not listed in my Lee handbook.
Was wondering if people had experience of it and what they would recommend for a 158gm bullet in .38 Special case. Chap I bought it off reckoned 3.8 grains of powder.
Do not use this data for .38 special
ukrifleman
-
Lever357
- Posts: 460
- Joined: Mon Jan 09, 2017 1:10 pm
- Home club or Range: Louisa Centre
- Location: Newcastle UponTyne
- Contact:
Re: Load Data
As UK rifleman states, the data given in that link is for .357 NOT .38 - otherwise I would not have started the post!!
Remember, we're all here because we're not all there!
-
Countryman
- Posts: 378
- Joined: Mon Nov 17, 2014 4:48 pm
Re: GM3 and 357 Mag reloading
3.8 -4.2. You will find the sweet spot somewhere in there.Lever357 wrote:Bought my reloading gear last week at the shooting show and the powder I got is Vectan GM3. This is not listed in my Lee handbook.
Was wondering if people had experience of it and what they would recommend for a 158gm bullet in .38 Special case. Chap I bought it off reckoned 3.8 grains of powder.
Sent from my boing using "An application"
-
Lever357
- Posts: 460
- Joined: Mon Jan 09, 2017 1:10 pm
- Home club or Range: Louisa Centre
- Location: Newcastle UponTyne
- Contact:
Re: GM3 and 357 Mag reloading
Ah, an answer! Thank you countryman!
Remember, we're all here because we're not all there!
-
Ovenpaa
- Site Supporter Since 2015
- Posts: 24680
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: GM3 and 357 Mag reloading
I have some GM3 coming so I will give it a try as well 
Who is online
Users browsing this forum: No registered users and 6 guests