What torque should the action screws be inserted to?
Or is it something I don't need to be concerned about?
Rem 700 torque settings
Moderator: dromia
- Ovenpaa
- Site Supporter Since 2015
- Posts: 24680
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: Rem 700 torque settings
45 ft lbs/5.1nm is what I torque to however it is worth experimenting up and down slightly as you can tune your group size very slightly by subtle changes to the action screw tightness.
Re: Rem 700 torque settings
Excellent.
Thanks.
Taking it apart to get screw cut and want to assemble correctly.
Thanks.
Taking it apart to get screw cut and want to assemble correctly.
Re: Rem 700 torque settings
I only have in/lbs on my torque driver.
- Ovenpaa
- Site Supporter Since 2015
- Posts: 24680
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: Rem 700 torque settings
That should have been 45 in/lbs
Re: Rem 700 torque settings
I tightened to that, seems fine. Thanks again.
Who is online
Users browsing this forum: No registered users and 11 guests