Storing Primers & Powder

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
phaedra1106
Posts: 3390
Joined: Wed Feb 08, 2012 9:37 pm
Location: Just outside Sacriston (the nice bit!)
Contact:

Re: Storing Primers & Powder

#11 Post by phaedra1106 »

Must admit I hadn't thought of including Sec 2 ammunition as well, having about 2000 cartridges will be around 3Kg so after I stock up on N140 that will put me about 500gr under the limit!
There's room for all Gods creatures, next to the mash and gravy :)
User avatar
meles meles
Posts: 6333
Joined: Mon Jun 06, 2011 8:17 pm
Home club or Range: HBSA
Location: Underground
Contact:

Re: Storing Primers & Powder

#12 Post by meles meles »

Hmmm, room for another pawful of canned bangs then !
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun



Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Dustyman
Posts: 112
Joined: Sun Feb 26, 2012 3:42 pm
Location: Dudley MBC

Re: Storing Primers & Powder

#13 Post by Dustyman »

Happy to be corrected , but I thought primers as you have to produce a fac to purchase , had to be stored securely eg in a locked cabinet ? Powder I also understand is not a possession limit BUT a location limit eg you can have 30 kilos so long as u only have up to the limited amount at one location . Latter from my RFD the former from a previous FLO . If I'm in the wrong would much appreciate the correct / legal stance. Cheers Ian
243, 7mm , 22, 308 , 45, 357, 9mm, v8, 120mph, 36.26.34, Do you notice how all good things have numbers in them ?
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests