7mm rsaum
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Berger
- Posts: 300
- Joined: Mon Dec 26, 2016 1:12 pm
- Home club or Range: Bisley
- Location: The west country
Re: 7mm rsaum
Popular cartridge I see .so say a more efficient than the 7mm wsm.
-
The Gun Pimp
- Posts: 1154
- Joined: Fri Dec 10, 2010 3:08 pm
- Contact:
Re: 7mm rsaum
Not in my experience.
-
Ovenpaa
- Site Supporter Since 2015
- Posts: 24680
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: 7mm rsaum
I shoot one however I run it on N560 so cannot help.
-
Swamp Donkey
- Posts: 341
- Joined: Mon Jun 30, 2014 7:49 am
- Home club or Range: Wessex Rifles
Re: 7mm rsaum
All i can help with. ![Image](https://uploads."An application"-cdn.com/20170622/277e26c4b8c9022cfb72aa131993893e.jpg)
Sent from my mobile using "An application"
Sent from my mobile using "An application"
-
Berger
- Posts: 300
- Joined: Mon Dec 26, 2016 1:12 pm
- Home club or Range: Bisley
- Location: The west country
Re: 7mm rsaum
Cheers swamp donkey
-
Berger
- Posts: 300
- Joined: Mon Dec 26, 2016 1:12 pm
- Home club or Range: Bisley
- Location: The west country
Re: 7mm rsaum
Hi Bud.Ovenpaa wrote:I shoot one however I run it on N560 so cannot help.
I have got some N560 I may well try if you want to pm me your recipe.is there a certain magnum primer that you think helps the es.i am not familiar the magnum primers at all.some use cci br2s in them.
-
Ovenpaa
- Site Supporter Since 2015
- Posts: 24680
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: 7mm rsaum
I only use CCI BR Large rifle primers
-
Berger
- Posts: 300
- Joined: Mon Dec 26, 2016 1:12 pm
- Home club or Range: Bisley
- Location: The west country
Re: 7mm rsaum
Why !!!!!Ovenpaa wrote:I only use CCI BR Large rifle primers
-
Ovenpaa
- Site Supporter Since 2015
- Posts: 24680
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: 7mm rsaum
Because I had the best results with them during load development, it shot a 37mm group at 600m one morning at Ulfborg in Denmark which from memory was around .25 MOA so I decided to call it a day with the development. I did tale to pointing bullets later on which gave a further slight improvement on vertical dispersion so good enough for me. I do not shoot the rifle these days as I have stopped shooting competitions in the Open class.
Who is online
Users browsing this forum: No registered users and 8 guests