Does anyone have an annealeez machine or know where I can get one , or any other annealing machine, and no I can't make one..LOL, and what are the other types of annealing pro's/ con's, any info please, Gerry
Annealeez machine
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
- Posts: 124
- Joined: Thu Mar 30, 2017 2:38 pm
- Home club or Range: WNSC
- Location: West Midlands
- Contact:
Annealeez machine
Gerry939
- phaedra1106
- Past Supporter
- Posts: 3389
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Annealeez machine
Have chat with Lubo (Raptor Calls) on UKV, he makes a very nice one,
http://ukvarminting.com/forums/topic/32 ... g-machine/
Or he has a FaceAche page as well :)
https://www.facebook.com/raptorvarminting/
http://ukvarminting.com/forums/topic/32 ... g-machine/
Or he has a FaceAche page as well :)
https://www.facebook.com/raptorvarminting/
There's room for all Gods creatures, next to the mash and gravy :)
Re: Annealeez machine
Induction heating is the way to go not gas
-
- Posts: 124
- Joined: Thu Mar 30, 2017 2:38 pm
- Home club or Range: WNSC
- Location: West Midlands
- Contact:
Re: Annealeez machine
Thanks Phaedra
Ive just ordered an annealing Machine
And torch & Gas just need to get some good instructions and away i go.
Ive just ordered an annealing Machine
And torch & Gas just need to get some good instructions and away i go.
Gerry939
- phaedra1106
- Past Supporter
- Posts: 3389
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Annealeez machine
Buy some Tempilaq, 650f for just below the shoulder or 750f for inside the neck (more difficult to see).
Don't do it in the dark waiting for the case necks to "just glow cherry red" (as is often suggested on the net) as that's a great way to bugger your cases.
Don't do it in the dark waiting for the case necks to "just glow cherry red" (as is often suggested on the net) as that's a great way to bugger your cases.
There's room for all Gods creatures, next to the mash and gravy :)
Who is online
Users browsing this forum: No registered users and 19 guests