QuickLoad query....

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
Sim G
Past Supporter
Posts: 10729
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

QuickLoad query....

#1 Post by Sim G »

Gents,

Can someone who has QuickLoad do me a favour? For cast gallery loads in .223, I had been using Trail Boss. REACH has killed that, so I got a tub of Vhiatavouri N32C, aka Tin Star.

The burn rate of Tin Star seems to sit just above Unique burn speed and was looking to start round about 6 to 6.5gns, so could someone punch it in?

62gn cast bullet, loaded to 2.25” 6.0gns of Tin Star (N32C)

I think I may have to go down as low as 4.0gns because of case capacity, so if you could chuck that through as well please.

Thanks in advance.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
Racalman
Posts: 709
Joined: Tue Mar 11, 2014 8:21 am
Home club or Range: LPSC and NRA
Location: Berkshire

Re: QuickLoad query....

#2 Post by Racalman »

Hi Sim

I wouldn't know where to find a cast bullet so picked one at random.

This any help?
QuickLoad.JPG
User avatar
Sim G
Past Supporter
Posts: 10729
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

Re: QuickLoad query....

#3 Post by Sim G »

Thanks for the help :good:
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests