If you're a OK with a soldering iron and don't mind delving in a bit, then yes, it's not a difficult DIY job - I can supply the remote button and correct socket.Triffid wrote:Hi Allan.
Is it possible to fit the remote start button to an older TM?
I assume a new socket will be required and internal wiring to connect it.
Triffid
Targetmaster sensor designed for 10/10 and M5 scale.
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Targetmaster sensor designed for 10/10 and M5 scale.
Who is online
Users browsing this forum: Google [Bot] and 16 guests