Page 1 of 1
Educate Badger: reloading dies for .338
Posted: Tue Sep 10, 2019 7:02 pm
by meles meles
Oomans, we're about to start pawloading for .338 and wondered what dies we ought to be using.
Our rounds will be for long range use (1 and 2 miles at Eskdalemuir), probably 275 and 300 grain bullets, in a 32" inch Bartlein barrel propelled by RS76 or Viht 160 powder. For most of our existing rifles, predominantly WW1 and WW2 battle rifles, we use Lee dies and neck size only. With the .338 we're wanting to extract all reasonable accuracy and so are wondering if we should stick with Lee dies, upgrade to a Lyman carbide die set, or try something else. What do you suggest?
Re: Educate Badger: reloading dies for .338
Posted: Wed Sep 11, 2019 9:15 am
by mag41uk
is there such a thing as Lyman carbide dies for this calibre?
Re: Educate Badger: reloading dies for .338
Posted: Wed Sep 11, 2019 6:36 pm
by meles meles
Sort of. The Lyman die bodies are steel but have a carbide expander that slips inside the case and, well, expands it.
Re: Educate Badger: reloading dies for .338
Posted: Fri Sep 13, 2019 11:47 pm
by Alpha1
meles meles wrote:Sort of. The Lyman die bodies are steel but have a carbide expander that slips inside the case and, well, expands it.
Im not sure the expanders are carbide.
Not being funny or anything but at your level of expertise I would suggest you buy a set of Lee dies if they do them in .338 and just full length resize.
Judging by your previous posts and I may be wrong you are not into serious handloading I would keep it simple.
Re: Educate Badger: reloading dies for .338
Posted: Sat Sep 14, 2019 10:42 am
by glevum
You can get Lyman Dies with carbide expander buttons.
https://www.lymanproducts.com/deluxe-3-die-rifle-sets
Re: Educate Badger: reloading dies for .338
Posted: Sat Sep 14, 2019 10:51 am
by dromia
As the abominations that are expander buttons should be removed and destroyed as soon as you get any dies then it would seem a tad foolish to pay any extra for carbide ones.
Re: Educate Badger: reloading dies for .338
Posted: Sat Sep 14, 2019 3:58 pm
by Alpha1
dromia wrote:As the abominations that are expander buttons should be removed and destroyed as soon as you get any dies then it would seem a tad foolish to pay any extra for carbide ones.
I agree.
Re: Educate Badger: reloading dies for .338
Posted: Mon Sep 16, 2019 4:35 pm
by meles meles
Why so? We aren't familiar with this butchery of dies.
Re: Educate Badger: reloading dies for .338
Posted: Mon Sep 16, 2019 11:10 pm
by Alpha1
I rarely use die sets from the big names nowadays. I don't use full-length sizing or seating dies. My reloading set up for jacketed bullets is a Reding body die with competition shell holders to set the case shoulder back.
A L.E.Wilson type neck bushing die to resize the case neck not an expander insight. Then a L.E.Wilson micrometer seating die to seat the bullet.
The L.E.Wilson dies are either bought or made by my self. I also use Leeloaders neck sizing kits but I modify them to work with my Arbor press.
All my handloading is done on my Arbor press or a Wamadet press.
I have made L.E.Wilson type dies or modified Leeloaders to suit all of my rifle calibers in either jacketed or cast bullets.
I made a set for my 6.5 Creedmoor and used them to handload ammunition for my zeroing session last weekend. I will be using them to create ammunition for this weekend.
I admit my reloading kit is not the norm but I enjoy making it adapting it and turning out ammo that just works.
I'm quite anal about measuring and weighing stuff as well. All my measuring cartridge overall length gauges. Shoulder bump gauges etc etc come from the shooting shed I don't use anybody else,s kit.