Load development .44 mag lever rifle?

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Jorden
Posts: 62
Joined: Fri Jan 15, 2021 7:53 pm
Home club or Range: ponteland
Location: newcastle upon tyne
Contact:

Re: Load development .44 mag lever rifle?

#11 Post by Jorden »

a member of our club has a Marlin .44, it slugs out at .433
micken
Posts: 41
Joined: Thu Mar 14, 2019 10:38 pm
Home club or Range: Yorkshire Shooting Centre, Huddersfield
Contact:

Re: Load development .44 mag lever rifle?

#12 Post by micken »

@Jorden thanks for that info, it's what I'm reading about the Marlin.
Scrumbag
Posts: 91
Joined: Wed Jul 29, 2020 3:45 pm
Home club or Range: BSRC & HPRPC
Contact:

Re: Load development .44 mag lever rifle?

#13 Post by Scrumbag »

.430 labelled and mic’ed at just maybe a bit over 1 thou under that.

Scrummy
micken
Posts: 41
Joined: Thu Mar 14, 2019 10:38 pm
Home club or Range: Yorkshire Shooting Centre, Huddersfield
Contact:

Re: Load development .44 mag lever rifle?

#14 Post by micken »

Cheers Scrummy
Scrumbag
Posts: 91
Joined: Wed Jul 29, 2020 3:45 pm
Home club or Range: BSRC & HPRPC
Contact:

Re: Load development .44 mag lever rifle?

#15 Post by Scrumbag »

micken wrote:Cheers Scrummy
No wukkas.
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests