Lee RGB v Pacesetter

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
MrD
Posts: 263
Joined: Wed Jan 18, 2012 10:47 pm
Location: Forres, Moray
Contact:

Lee RGB v Pacesetter

#1 Post by MrD »

Hi

I'd like to replace my Lee 303 F/L resizing die without having to spend money on a complete Pacesetter set. Can anyone tell me if the F/L die is the same in each set? Pacesetter F/L code is 91086

Cheers

Donald
Save it for a mammal who cares!

http://www.cawdorrifleandgunclub.co.uk/
ukrifleman
Past Supporter
Posts: 725
Joined: Thu Jun 07, 2012 7:26 pm
Contact:

Re: Lee RGB v Pacesetter

#2 Post by ukrifleman »

As far as I am aware, the only difference between Pacesetter and RGB dies, is that you don't get the shell holder and powder scoop with RGB dies.
I have a set and found no difference in performance or quality.
ukrifleman
User avatar
MrD
Posts: 263
Joined: Wed Jan 18, 2012 10:47 pm
Location: Forres, Moray
Contact:

Re: Lee RGB v Pacesetter

#3 Post by MrD »

ukrifleman wrote: Tue Oct 12, 2021 1:31 pm As far as I am aware, the only difference between Pacesetter and RGB dies, is that you don't get the shell holder and powder scoop with RGB dies.
I have a set and found no difference in performance or quality.
ukrifleman
Much appreciated cheers
Save it for a mammal who cares!

http://www.cawdorrifleandgunclub.co.uk/
capper
Posts: 33
Joined: Mon Apr 05, 2021 7:34 pm
Contact:

Re: Lee RGB v Pacesetter

#4 Post by capper »

Both sets of these dies from Lee seem identical to me & in use
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests