Range Maintenance
Posted: Fri Jul 12, 2019 10:18 am
Whenever I talk about range maintenance everybody either disappears or looks at their feet. Ever since I have been shooting it has been something that has to be done but nobody wants to do it. We here at Kynamco have a weekly clean up and replacement of lights, target frames, shovel the sand back into the back stop and most importantly vacuum the whole range with a hepa filtered vacuum cleaner. This exercise takes about 4 hours.
Once every quarter we have Back Stop Brian whose job is to dig out the back stop, sift the sand to remove any chunks and generally keep the back stop in good condition. This usually takes 1 to 1 ½ days.
I learnt the importance of keeping your back stop in good condition many years ago when an ex-military range I shot at was closed down for a time due to the back stop not being kept in good condition. The sand had turned into rocks because of the continual vibration and impact of the bullets and we were getting quite serious ricochets from those hard lumps. Also a build-up of lead and bullet debris created balls of hard material which again caused ricochet problems. Previously the only maintenance done on the back stop was by a family of rabbits who seemed to be quite happy to live at the bottom of the back stop and graze completely unconcerned on the grass in front of the back stop. To my knowledge they were never shot as it meant that somebody would have to mow the grass if the rabbits were removed.
However, going back to range maintenance. An indoor range has special requirements to meet the health and safety aspects. All shooting areas and floor, walls etc must be kept clean and free from any contamination caused by lead from the primers or bullets. Also the firing residue leaves a sticky surface if not regularly cleaned.
We pride ourselves in keeping the range in good condition and clean but I am still amazed after 50 years of shooting to see where bullets get to on the range. However, the real mystery is that nobody ever admits a wild shot. I think that some nights the shooting spirits have a bit of fun on their own!
Once every quarter we have Back Stop Brian whose job is to dig out the back stop, sift the sand to remove any chunks and generally keep the back stop in good condition. This usually takes 1 to 1 ½ days.
I learnt the importance of keeping your back stop in good condition many years ago when an ex-military range I shot at was closed down for a time due to the back stop not being kept in good condition. The sand had turned into rocks because of the continual vibration and impact of the bullets and we were getting quite serious ricochets from those hard lumps. Also a build-up of lead and bullet debris created balls of hard material which again caused ricochet problems. Previously the only maintenance done on the back stop was by a family of rabbits who seemed to be quite happy to live at the bottom of the back stop and graze completely unconcerned on the grass in front of the back stop. To my knowledge they were never shot as it meant that somebody would have to mow the grass if the rabbits were removed.
However, going back to range maintenance. An indoor range has special requirements to meet the health and safety aspects. All shooting areas and floor, walls etc must be kept clean and free from any contamination caused by lead from the primers or bullets. Also the firing residue leaves a sticky surface if not regularly cleaned.
We pride ourselves in keeping the range in good condition and clean but I am still amazed after 50 years of shooting to see where bullets get to on the range. However, the real mystery is that nobody ever admits a wild shot. I think that some nights the shooting spirits have a bit of fun on their own!