Anschütz 64 Match versus 1913 bolt

[Ovenpaa]

Can anyone tell me if the 64 Match and 1913 Anschütz bolts are similar or even interchangeable?

[Les]

Isn't the 1913 based on the Match 54 action?

If it is, then I doubt whether anything will be interchgeable with a 64 action.

I have a 16xx series Match 54 - with the X barrel - and although it looks identical to the normal Match 54, it isn't. The bolt is different, and so is the trigger assembly.

[Kungfugerbil]

As above. No is the short answer. The long answer is "Noooooooooooo".

Sorry.

64 and 54 are different and never the twain shall meet.

[Kungfugerbil]

I have a 16xx series Match 54 - with the X barrel - and although it looks identical to the normal Match 54, it isn't. The bolt is different, and so is the trigger assembly.

Indeed - the '16' series onwards (mid seventies to very early 80s) lost the wing safety on the bolt. The bolt was then changed in a couple of minor ways for the 18xx (firing pin, slot at bottom) then stayed unchanged until the latest iteration (54.30?) where it got a lot shorter. There have been a few trigger variants in that time.

I have a 16X as my rimfire benchrest rifle, it shoots well.

[Les]

Yep, my bolt looks like the top one in your pic, and has the different firing pin and the slot underneath. The 16xx series was a transition between the 14xx and 18xx. Great when they're working, but basically scrap if anything breaks unless you know a good fabricator/tool maker.

Great barrels, though!