NOE bullet moulds

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

NOE bullet moulds

#1 Post by Alpha1 »

Ordered some stuff off them. There does not seem to be a lot going on in there forum.
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NOE bullet moulds

#2 Post by Alpha1 »

Ordered the mold on roughly the 2nd December took 5 days to arrive at Heathrow tracked all the way then nothing. It's the 17th now no idea where it is. No wonder this Country is ...... .
I have been ordering quite a lot of stuff from the USA recently not all of it shooting related everything goes fine until it arrives in the UK then it just goes into black hole. Its costing me money in orders I can not fulfill I'm not a happy bunny.
User avatar
dodgyrog
Site Supporter Since 2015
Posts: 4096
Joined: Wed Jan 05, 2011 11:17 pm
Home club or Range: Three Counties Sporting Club & Gardners Guns
Location: Consett, County Durham
Contact:

Re: NOE bullet moulds

#3 Post by dodgyrog »

Alpha1 wrote:Ordered the mold on roughly the 2nd December took 5 days to arrive at Heathrow tracked all the way then nothing. It's the 17th now no idea where it is. No wonder this Country is ...... .
I have been ordering quite a lot of stuff from the USA recently not all of it shooting related everything goes fine until it arrives in the UK then it just goes into black hole. Its costing me money in orders I can not fulfill I'm not a happy bunny.
Same with me - ordered a new 44 mould - still waiting!
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
Dahonis

Re: NOE bullet moulds

#4 Post by Dahonis »

Will be sat with the Border Agency in a warehouse with thousands of others. Busy time of year.

It's a poor show that it's hit n miss with parcels in this country
ukrifleman
Past Supporter
Posts: 725
Joined: Thu Jun 07, 2012 7:26 pm
Contact:

Re: NOE bullet moulds

#5 Post by ukrifleman »

I don't mean to sound too depressing, but I ordered a Grip-N-Pull bullet puller from the US last year and it sat in UK customs for 6 weeks.
After I had paid import duty etc, the cost rose by about 75%!
ukrifleman.
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NOE bullet moulds

#6 Post by Alpha1 »

I buy a lot of stuff from the USA not all shooting related in fact only a small portion is shooting related. Most of it is for my other hobbies/enterprises. No matter where I buy it from it fairly zips across the USA five days is average to end up at Heathrow. Then it disappears into a black hole. No tracking info nothing. I have waited months for packages to arrive and usually with a customs charge before I can get my hands on them.
No wonder this Country is ------.
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NOE bullet moulds

#7 Post by Alpha1 »

Got my mould to day. I'm really pleased with the mould. It spent just over four weeks with customs about six weeks in all for delivery I guess it's the price you pay. There was a custom charge as well. They had really torn into the parcel I was worried some of the bits might of been missing. They obviously thought it needed a serious coat of looking at.Oh well it's here now so I feel a casting session coming on. If I can find the time to fit it in.

Happy days.
hmm whats next teanews
User avatar
dodgyrog
Site Supporter Since 2015
Posts: 4096
Joined: Wed Jan 05, 2011 11:17 pm
Home club or Range: Three Counties Sporting Club & Gardners Guns
Location: Consett, County Durham
Contact:

Re: NOE bullet moulds

#8 Post by dodgyrog »

I received mine a couple of weeks ago and had to pay £28 in duty and fees Grrr
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NOE bullet moulds

#9 Post by Alpha1 »

Yes they charged me a similar amount. But it's here now. There are lots of goodies on the web site I would like but actually getting it over here is just a nightmare. I used to send my stuff to Florida and one of our Engineers who has a Holiday home there used to do a gun run twice a year for me. But unfortunately he has left and now works for another Company. So he could be anywhere in the World now a days such is the nature of the business.
Anyway.
hmm what's next teanews. I have got a ..it load of 7.62x39 cases and a couple of NOE moulds for the same I guess I should do something with them.
User avatar
legs748
Posts: 238
Joined: Sat Jul 07, 2012 1:08 pm
Home club or Range: Mattersey R&PC
Location: North Nottinghamshire
Contact:

Re: NOE bullet moulds

#10 Post by legs748 »

I ordered from NOE and my mould took 7-10 days door to door, no customs fees no hassle, couldn’t be happier.
It was working when i left it...........
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests