Eley Speed Steels - Stourport-on-Severn - July 2019

Made or missed the shot of a lifetime? Share your shooting trips with everyone. Tell us about it. We won't laugh, honest!

Moderator: dromia

Post Reply
Message
Author
User avatar
TattooedGun
Past Supporter
Posts: 2509
Joined: Mon Jul 11, 2011 11:55 am
Home club or Range: Dudley Rifle Club, WNSC, UKPSA, Bromsgrove
Location: West Midlands
Contact:

Eley Speed Steels - Stourport-on-Severn - July 2019

#1 Post by TattooedGun »

Image

https://eley.co.uk/stourport-speed-steel-july/

Had a great event down at http://www.stourportonsevernpistolnrifleclub.co.uk/ last weekend.

Shooting (Standard) Iron sights LBP in a field of Open (Red Dot) shooters, probably not my finest decision, but I enjoyed it all the same.

Mini Rifle was average, and found my Lantac a little heavy for the discipline with it's current setup of Vortex strike eagle with canted red dot. For the discipline all that's needed is a red dot on top and to keep the weight down so might try and mix things up slightly for the next event.

Don't have much more to add other than the link to the Eley page with results and some cracking photos from the day.

Was a long couple of days as the Eley Speed steel shoot was the Saturday, then a drive down to the south coast and up at 5:15 to catch the ferry over to Isle Of Wight for the next round of the NRA Handgun League.
Gh0st
Posts: 785
Joined: Fri Aug 11, 2017 10:30 am
Home club or Range: FDPC
Location: West Country
Contact:

Re: Eley Speed Steels - Stourport-on-Severn - July 2019

#2 Post by Gh0st »

Gutted I missed this one. Have signed up for October with both lbp and Minirifle
All views expressed are my own unless otherwise stated! So please take your time to consider my opinions as biased to what i think is best....

http://www.bulletsandpixels.co.uk www.fdpc.org.uk
User avatar
TattooedGun
Past Supporter
Posts: 2509
Joined: Mon Jul 11, 2011 11:55 am
Home club or Range: Dudley Rifle Club, WNSC, UKPSA, Bromsgrove
Location: West Midlands
Contact:

Re: Eley Speed Steels - Stourport-on-Severn - July 2019

#3 Post by TattooedGun »

Gh0st wrote:Gutted I missed this one. Have signed up for October with both lbp and Minirifle
Me too, See you there :)
Gh0st
Posts: 785
Joined: Fri Aug 11, 2017 10:30 am
Home club or Range: FDPC
Location: West Country
Contact:

Re: Eley Speed Steels - Stourport-on-Severn - July 2019

#4 Post by Gh0st »

TattooedGun wrote:
Gh0st wrote:Gutted I missed this one. Have signed up for October with both lbp and Minirifle
Me too, See you there :)
cheers Say hello!
All views expressed are my own unless otherwise stated! So please take your time to consider my opinions as biased to what i think is best....

http://www.bulletsandpixels.co.uk www.fdpc.org.uk
User avatar
shugie
Past Supporter
Posts: 1602
Joined: Sun Apr 29, 2012 3:42 pm
Home club or Range: Sperry at Bisley
Location: near Reading
Contact:

Re: Eley Speed Steels - Stourport-on-Severn - July 2019

#5 Post by shugie »

Interesting comment on the Lantac weight, I have the shortest legal barrel and find that works well for speed steels with a Vortex Venom red dot. If changing the main sight over doesn't resolve the problem, perhaps shortening the barrel might help, although I think the difference in weight might be small, it's a weight saving which reduces the inertia (second polar moment?? -long time since I did this) and so reduces the amount of force required to swing the gun more than the weight alone would suggest.
Careful now/that sort of thing
User avatar
TattooedGun
Past Supporter
Posts: 2509
Joined: Mon Jul 11, 2011 11:55 am
Home club or Range: Dudley Rifle Club, WNSC, UKPSA, Bromsgrove
Location: West Midlands
Contact:

Re: Eley Speed Steels - Stourport-on-Severn - July 2019

#6 Post by TattooedGun »

shugie wrote:Interesting comment on the Lantac weight, I have the shortest legal barrel and find that works well for speed steels with a Vortex Venom red dot. If changing the main sight over doesn't resolve the problem, perhaps shortening the barrel might help, although I think the difference in weight might be small, it's a weight saving which reduces the inertia (second polar moment?? -long time since I did this) and so reduces the amount of force required to swing the gun more than the weight alone would suggest.
I did think about it following the first speed steels, a shorter barrel would definitely help with pointing at the targets.

The majority of my weight I believe would be in my Strike Eagle, it's a lot of glass up on the top of the rifle for speed steels. That and a canted sight on the rifle add's up the lbs and makes it a slower swing.

I think I'll move to red dot only which should see it much more pointable.

It's hard though, I don't really want to specialise this rifle to a speed steel gun as it's not what i want to do with it, I don't think the weight will make too much difference in practical, and the extra mag of the strike eagle might come in handy at longer distance stages. Although, in fairness, Josh hicks beats the crap out of everyone with only a red dot, so maybe it's not such a bad idea to run just a dot! ha!
Gh0st
Posts: 785
Joined: Fri Aug 11, 2017 10:30 am
Home club or Range: FDPC
Location: West Country
Contact:

Re: Eley Speed Steels - Stourport-on-Severn - July 2019

#7 Post by Gh0st »

TattooedGun wrote:
shugie wrote:Interesting comment on the Lantac weight, I have the shortest legal barrel and find that works well for speed steels with a Vortex Venom red dot. If changing the main sight over doesn't resolve the problem, perhaps shortening the barrel might help, although I think the difference in weight might be small, it's a weight saving which reduces the inertia (second polar moment?? -long time since I did this) and so reduces the amount of force required to swing the gun more than the weight alone would suggest.
I did think about it following the first speed steels, a shorter barrel would definitely help with pointing at the targets.

The majority of my weight I believe would be in my Strike Eagle, it's a lot of glass upon the top of the rifle for speed steels. That and a canted sight on the rifle add up the lbs and make it a slower swing.

I think I'll move to the red dot only which should see it much more pointable.

It's hard though, I don't really want to specialize this rifle to a speed steel gun as it's not what I want to do with it, I don't think the weight will make too much difference in practical, and the extra mag of the strike eagle might come in handy at longer distance stages. Although, in fairness, Josh hicks beats the crap out of everyone with only a red dot, so maybe it's not such a bad idea to run just a dot! ha!
I think you're right a certain extent, the ideal gun would be one dedicated to Steels. Light, Short, Red dot only.

I shot the April one with my 10/22 and my PST 1-6. the rifle was great scope was too much. it weighs 1.4 lbs. Although I put the scope on because the COF said the targets were out to like 30m. they weren't.

October im going to either run my NWCP AR with a dot or the 10/22 with a dot.
All views expressed are my own unless otherwise stated! So please take your time to consider my opinions as biased to what i think is best....

http://www.bulletsandpixels.co.uk www.fdpc.org.uk
User avatar
shugie
Past Supporter
Posts: 1602
Joined: Sun Apr 29, 2012 3:42 pm
Home club or Range: Sperry at Bisley
Location: near Reading
Contact:

Re: Eley Speed Steels - Stourport-on-Severn - July 2019

#8 Post by shugie »

I switch over a red dot for an ACOG for a bit more magnification when not shooting speed steels, quick release bases seem to maintain zero to a reasonable extent. Not sure that the short barrel makes any difference in gallery rifle in terms of accuracy, I'd need to improve my shooting quite considerably for a longer barrel giving better scores.
Careful now/that sort of thing
Gh0st
Posts: 785
Joined: Fri Aug 11, 2017 10:30 am
Home club or Range: FDPC
Location: West Country
Contact:

Re: Eley Speed Steels - Stourport-on-Severn - July 2019

#9 Post by Gh0st »

shugie wrote:I switch over a red dot for an ACOG for a bit more magnification when not shooting speed steels, quick release bases seem to maintain zero to a reasonable extent. Not sure that the short barrel makes any difference in gallery rifle in terms of accuracy, I'd need to improve my shooting quite considerably for a longer barrel giving better scores.
Quite a lot of GR shooters opt for shorter barrels on .22 anyway.
All views expressed are my own unless otherwise stated! So please take your time to consider my opinions as biased to what i think is best....

http://www.bulletsandpixels.co.uk www.fdpc.org.uk
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests