6.5 Creedmoor dies

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

6.5 Creedmoor dies

#1 Post by Alpha1 »

I am convinced I had a set of 6.5 Creedmoor dies I am sure I bought the Lee four die set I can find the Lee neck die and the crimp die but I have had the House up side down looking for the full length resizer and seater.
So I thought I better buy a new set I decided against Lee otherwise I would end up with two neck dies and two crimp dies. I did a google search most people seem to be out of stock on anything for the 6.5. I ended up buying a Hornady two die set.
They were expensive are they worth the money. Are they any better than other offerings from other die manufactures. Any one have experience with Hornady dies.
The Gun Pimp
Posts: 1154
Joined: Fri Dec 10, 2010 3:08 pm
Contact:

Re: 6.5 Creedmoor dies

#2 Post by The Gun Pimp »

The Hornady 'Match' dies are very good. A full length sizer and a seater will do the job.
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: 6.5 Creedmoor dies

#3 Post by Alpha1 »

They arrived to day they look Ok. We will see how they perform.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 8 guests