CZ527 single shot adapter
Moderator: dromia
Forum rules
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
CZ527 single shot adapter
Just thought you guys would be interested to see something I've been working on this week.
This is a single shot adapter for the CZ 527 .223 made in solid polymer.
With the faster twists now available in .223, longer bullets are now in common use. This often necessitates single loading.
This adapter is designed to give a controlled feed, allowing the extractor to slide in behind the cartridge rim for a much smoother feed.
Just thought you guys would be interested to see something I've been working on this week.
https://vimeo.com/729234168
This is a single shot adapter for the CZ 527 .223 made in solid polymer.
With the faster twists now available in .223, longer bullets are now in common use. This often necessitates single loading.
This adapter is designed to give a controlled feed, allowing the extractor to slide in behind the cartridge rim for a much smoother feed.
Just thought you guys would be interested to see something I've been working on this week.
https://vimeo.com/729234168
- Dellboy
- Site Supporter 2021
- Posts: 2616
- Joined: Wed Aug 31, 2011 11:49 am
- Home club or Range: Star Shooting Club
- Location: Essex
- Contact:
Re: CZ527 single shot adapter
nice work
2020 GOOD DEALS WITH
Cutch Vortex Scope
Mauserbill Enfield Books
Enjoy today as tomorrow might not come .
Noli pati a scelestis opprimi.
002515
Cutch Vortex Scope
Mauserbill Enfield Books
Enjoy today as tomorrow might not come .
Noli pati a scelestis opprimi.
002515
Re: CZ527 single shot adapter
Oh boy! How much to do me one of those?!!
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
- dromia
- Site Admin
- Posts: 19985
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: CZ527 single shot adapter
I am sure that if 1066 is going to make these available for sale you will be able to respond to his post in the for sale forum.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: CZ527 single shot adapter
Would this work with CZ527 in 204Ruger?
Re: CZ527 single shot adapter
Indeed it will - also the 17 Rem.
Re: CZ527 single shot adapter
Well, I’ve got one of these now, thank you Allan.
The quality of the finish is spot on. A lovely bluey-grey colour, with clear markings giving the rifle model number and Allan’s trade mark on the other side. There were no sharp edges or bits of slag that would ordinarily of required trimming with a sharp knife. The thing feels solid.
It slid into the mag well easy and when locked in place, did so with no discernible movement. Whether the mag catch will wear the notch over time is anyones guess, but initially it’s not of concern. To start off with I didn’t really notice, but the adapter is about 80% the length of a 5 round box magazine. Obviously this causes no issues and there’s plenty of material to grab hold of when removing it from the rifle.
When in place, the top of the adapter is a little more proud than the box magazine. But, that means there is no feed angle when a round is chambered. Lined up well enough that the round went straight into the chamber mouth, with the bolt riding above the adapter by a fags paper width.
I’ve only tried it in the conservatory so far, loading and ejecting cartridges that are the SAAMI max of 2.260. I have every confidence that longer cartridges will cause no issues, which is the reason I got it!
Thanks Allan, a cracking piece of kit!!!
The quality of the finish is spot on. A lovely bluey-grey colour, with clear markings giving the rifle model number and Allan’s trade mark on the other side. There were no sharp edges or bits of slag that would ordinarily of required trimming with a sharp knife. The thing feels solid.
It slid into the mag well easy and when locked in place, did so with no discernible movement. Whether the mag catch will wear the notch over time is anyones guess, but initially it’s not of concern. To start off with I didn’t really notice, but the adapter is about 80% the length of a 5 round box magazine. Obviously this causes no issues and there’s plenty of material to grab hold of when removing it from the rifle.
When in place, the top of the adapter is a little more proud than the box magazine. But, that means there is no feed angle when a round is chambered. Lined up well enough that the round went straight into the chamber mouth, with the bolt riding above the adapter by a fags paper width.
I’ve only tried it in the conservatory so far, loading and ejecting cartridges that are the SAAMI max of 2.260. I have every confidence that longer cartridges will cause no issues, which is the reason I got it!
Thanks Allan, a cracking piece of kit!!!
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
- Dellboy
- Site Supporter 2021
- Posts: 2616
- Joined: Wed Aug 31, 2011 11:49 am
- Home club or Range: Star Shooting Club
- Location: Essex
- Contact:
Re: CZ527 single shot adapter
having tried to abuse the 22 version( it is 1st class) i have recieved one of these have a day on the range next week with 3 cz 223 so we will be trying it out . I expect no problems
2020 GOOD DEALS WITH
Cutch Vortex Scope
Mauserbill Enfield Books
Enjoy today as tomorrow might not come .
Noli pati a scelestis opprimi.
002515
Cutch Vortex Scope
Mauserbill Enfield Books
Enjoy today as tomorrow might not come .
Noli pati a scelestis opprimi.
002515
Re: CZ527 single shot adapter
I too have been trying the .22 version in my 452 and agree it's first class if ever so slightly tight in the magazine well.
I don't see that as a fault, if anything I see that as a positive feature as it won't fall out and just requires a push from the top to remove.
- Dellboy
- Site Supporter 2021
- Posts: 2616
- Joined: Wed Aug 31, 2011 11:49 am
- Home club or Range: Star Shooting Club
- Location: Essex
- Contact:
Re: CZ527 single shot adapter
just to add tried in 452 455 and 457 all good ..
2020 GOOD DEALS WITH
Cutch Vortex Scope
Mauserbill Enfield Books
Enjoy today as tomorrow might not come .
Noli pati a scelestis opprimi.
002515
Cutch Vortex Scope
Mauserbill Enfield Books
Enjoy today as tomorrow might not come .
Noli pati a scelestis opprimi.
002515
Who is online
Users browsing this forum: No registered users and 6 guests