Accurate 5744
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
daryldiane
- Posts: 161
- Joined: Sat Oct 20, 2012 5:52 pm
- Home club or Range: Bisley
- Contact:
Accurate 5744
Has anyone used Accurate 5744 with 115 grn lead loads in .30 M1 Carbine?
-
Mauserbill
- Posts: 1047
- Joined: Thu Jun 22, 2017 4:49 pm
- Home club or Range: Range
- Contact:
Re: Accurate 5744
Hello
I have used this accurate powder with great success in large case calibres, as it is a bulky cylindrical power made especially for that type of use very good in my 45/70 and large obsolete cases. No longer called 5744 It is now called D60. I have the Accurate reloading book if the load you are interested is in it I will post on the forum for you.
I have used this accurate powder with great success in large case calibres, as it is a bulky cylindrical power made especially for that type of use very good in my 45/70 and large obsolete cases. No longer called 5744 It is now called D60. I have the Accurate reloading book if the load you are interested is in it I will post on the forum for you.
-
Mauserbill
- Posts: 1047
- Joined: Thu Jun 22, 2017 4:49 pm
- Home club or Range: Range
- Contact:
-
daryldiane
- Posts: 161
- Joined: Sat Oct 20, 2012 5:52 pm
- Home club or Range: Bisley
- Contact:
Re: Accurate 5744
Super thanks
I have a kg of it which I bought for lead 303 loads.
Just starting to load for M1 Carbine. Since straight pull I’m not worried about whether it will cycle the action, which American reloaders are.
I have a kg of it which I bought for lead 303 loads.
Just starting to load for M1 Carbine. Since straight pull I’m not worried about whether it will cycle the action, which American reloaders are.
-
daryldiane
- Posts: 161
- Joined: Sat Oct 20, 2012 5:52 pm
- Home club or Range: Bisley
- Contact:
Re: Accurate 5744
How much should I reduce starter load for 115 lead grain bullets?
Who is online
Users browsing this forum: No registered users and 1 guest