357mag

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
Steve
Posts: 1030
Joined: Sat Apr 02, 2011 5:25 pm
Location: East Anglia

Re: 357mag

#11 Post by Steve »

ovenpaa wrote:At the risk of being flamed.......... :oops:

I have never had much luck with .303 case life, but other than that it is a cheap and easy round to load.
I've worked it out approximately and i recon around the £30 mark for 100 rounds of 303 which is atleast £20 cheaper than factory.I've read about the case rim being ripped off and is why im building up a collection of spent ones.
Do or not do-there is no try.
Master Yoda
User avatar
Ovenpaa
Posts: 24680
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: 357mag

#12 Post by Ovenpaa »

Peter used to some some nice 185 grain (ish) .311 spitzers for GBP10/100 - he may still have some left over.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
User avatar
dodgyrog
Posts: 4097
Joined: Wed Jan 05, 2011 11:17 pm
Home club or Range: Three Counties Sporting Club & Gardners Guns
Location: Consett, County Durham
Contact:

Re: 357mag

#13 Post by dodgyrog »

FYI My cast boolits (pistol calibre) are £40 per 1000 - I'll have a stand at the Phoenix selling the things. Various sizes and weights available.
Powder and primers are at very reasonable prices too.
PM me if interested.
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
User avatar
Steve
Posts: 1030
Joined: Sat Apr 02, 2011 5:25 pm
Location: East Anglia

Re: 357mag

#14 Post by Steve »

dodgyrog wrote:FYI My cast boolits (pistol calibre) are £40 per 1000 - I'll have a stand at the Phoenix selling the things. Various sizes and weights available.
Powder and primers are at very reasonable prices too.
PM me if interested.
You have pm.
Do or not do-there is no try.
Master Yoda
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest