Re: Best epoxy for wood
Posted: Wed Jul 06, 2022 10:21 am
Also, HOLY f*** they pricey for some brass pins
Buy some brass allthread off fleabay
https://www.ebay.co.uk/itm/283062283997 ... 3cEALw_wcB
The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.
Best epoxy for wood
Page 3 of 3
Re: Best epoxy for wood
Posted: Wed Jul 06, 2022 10:28 am
Re: Best epoxy for wood
Posted: Wed Jul 06, 2022 11:48 am
Sorry, I've just re-read my post and it sounded a bit condescending, didn't mean it to read like that.
It was more to show that the Brownells option was the main one you'd find.
Re: Best epoxy for wood
Posted: Wed Jul 06, 2022 12:59 pm
Not at all matey,
I just know there’s nothing as slightly annoying as when you are helping someone and when they ask for a link without bothering to google.
Re: Best epoxy for wood
Posted: Wed Jul 06, 2022 1:57 pm
Think this is the way to go.Graham M wrote: ↑Wed Jul 06, 2022 10:28 am Buy some brass allthread off fleabay
https://www.ebay.co.uk/itm/283062283997 ... 3cEALw_wcB
Thanks all again!
Re: Best epoxy for wood
Posted: Thu Jul 07, 2022 9:11 pm
That brass studding is expensive, m3 3.37 for 50mm.
Try your local model shop. They stock brass rod and a couple of quid should get you a metre or so
https://modelshop.co.uk/Shop/Item/Brass ... mm/ITM1943
Try your local model shop. They stock brass rod and a couple of quid should get you a metre or so
https://modelshop.co.uk/Shop/Item/Brass ... mm/ITM1943
Re: Best epoxy for wood
Posted: Fri Jul 08, 2022 8:15 am
You can buy 300mm for £7.31
Re: Best epoxy for wood
Posted: Fri Jul 08, 2022 1:07 pm
Awesome stuff
Re: Best epoxy for wood
Posted: Fri Jul 08, 2022 6:18 pm
I assume you've read Peter Laidler's draw repair guide?RJ156 wrote: ↑Sat Jul 02, 2022 10:59 pm Soooo, after my stock refurb, how I missed it don’t ask,
But my last shoot being ropey has now explained itself.
My no4 mk1 shot 1.5” group first time I shot it.
2nd time within 10” was difficult
I did a stock refurb, fitted a NGS scope mount and scope. Didn’t shoot it since but decided to strip it again to check the main screw bushing was correct length and noticed a crack in in of the draws.
Gave it a wiggle with a pick with the hope of re-adhesiving in situ.
The whole draw bolt handle side came loose. And separated from the stock.
What epoxy if any is worth an attempt. Before I replace the draw
Here, if you haven't.
https://www.milsurps.com/content.php?r= ... Laidler%29
He also states the important of using aerospace approved wood adhesive.
Re: Best epoxy for wood
Posted: Mon Jul 11, 2022 9:41 am
Ahh nice to see
Il have a read Thankyou matey.
Worst case if it fails again il do it properly
Il have a read Thankyou matey.
Worst case if it fails again il do it properly