PPU 174gr FMJBT B143 in 7.62 x 54R

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
knewmans
Posts: 404
Joined: Mon Oct 29, 2012 11:12 pm
Location: Surrey
Contact:
Contact knewmans

PPU 174gr FMJBT B143 in 7.62 x 54R

#1 Post by knewmans »

Hi

Is anyone using the PPU B143 174gr .303 FMJBT in 7.62x54R?

If so where did you go for load data? Its for my SVD

Thanks
Ken
Top
User avatar
leeroy7031
Site Supporter 2021
Posts: 414
Joined: Thu Sep 13, 2012 4:48 pm
Home club or Range: Uttoxteter Rifle Club, FCSA, Stafford Post Office Rifle & Pistol Club
Location: Stafford
Contact:
Contact leeroy7031

Re: PPU 174gr FMJBT B143 in 7.62 x 54R

#2 Post by leeroy7031 »

Yes, I used these and also in a Dragunov
Owning a handgun doesn't make you armed any more than owning a guitar makes you a musician ............ "Lieutenant Colonel Jeff Cooper"
Top
User avatar
Dark Skies
Posts: 2826
Joined: Tue Apr 22, 2014 11:02 am
Home club or Range: NRA
Contact:
Contact Dark Skies

Re: PPU 174gr FMJBT B143 in 7.62 x 54R

#3 Post by Dark Skies »

I use them. For reload data I used the propellant manufacturer's reloading stats. I've a small cache of H4895 I'm working through.
"I don't like my job and I don't think I'm gonna go anymore."
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 9 guests