The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Posted: **Sun May 28, 2023 10:49 pm**

I need to reduce some .308 case mouths internal diameters from 7.82mm to 7mm for a project.
Can any one advise on a way to do this I am thinking bushings but any advice is appreciated.

Posted: **Sun May 28, 2023 11:06 pm**

You could buy a secondhand 7-08 body die. If you make a bushing you will still need a bushing-type body die to hold the bushing.

Posted: **Sun May 28, 2023 11:19 pm**

The bushing type body die is not a problem its only the neck I need to alter.

The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Reducing a .308 case mouth from 7.82 to 7mm

Reducing a .308 case mouth from 7.82 to 7mm

Re: Reducing a .308 case mouth from 7.82 to 7mm

Re: Reducing a .308 case mouth from 7.82 to 7mm