7.5 x 55 Swiss

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8556
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: 7.5 x 55 Swiss

#11 Post by Alpha1 »

meles meles wrote: Wed Jun 14, 2023 9:48 pm We have had good results with PPU bullets in our K31, loaded with either a light load of RS30 powder for indoor use, or RS52 for full fat rounds. There are loading data on Reload Swiss's site at https://www.reload-swiss.com/en/reload_ ... hw_mass=ft
So you are shooting full metal jacketed bullets on a indoor range that surprises me.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests