Moulds for sale
Posted: Thu Jun 12, 2025 12:08 pm
I have finally decided to sort out the moulds I will never use again.
Getting old!
Can post at cost or meet at Bisley.
1. MP molds 358640 Aluminium 95gn rnfp 8 cavity NEW @ £90
2. MP molds 45-277SAA Brass 2 cavity NEW @ £75
3. MP molds 38HBWC 4 cavity brass – casts @ 0.360 approx – with pins for hollow base or solid base @ £85
4. MP molds 358-165RF gas check 4 cavity brass. Casts @ 0.360 approx @ £85 (I do have gas checks)
5. Saeco 4 cavity steel mold 64409. 41 caliber. Very rare @ £135
6. Lyman 4 cavity steel mold. 358477 PB, SWC, 150gn @ £85
7. Lyman 4 cavity steel mold. 358212 PB, RN, 146gn @ £85
8. Lyman 1 cavity mold. 311334 200gn gc inc approx 65 as cast bullets. @ £50 with or £40 without the bullets.
9. Lyman 1 cavity mold 454613. 265 grain Minie . This is a hollow base mold and comes with handles @ £65
10. Lyman 1 cavity mold. 515141aw PB, FN, 450 gn @ £50
11. Lyman 2 cavity mold. 323470av GC, RN, 165gn @ £50
12. NEI Aluminium 2 cavity mold. 375 277 @ £65
13. NEI Aluminium 2 cavity mold. 475 480 RNFP @ £65
14. NEI Aluminium 2 cavity mold. 390 290 9.5 Turk @ £65
15. NEI Aluminium 1 cavity hollow base mold. 450450. Whitworth mold. With handle @ £85
16. Lee Custom mold. 1 cavity for the Martini Henry. Casts around 0.468 approx 480gn @ £50
17. Lee 6 cavity 30 cal RNFP gas check mold. Approx 180gns. A copy of the RCBS silhouette bullet. Casts @ 0.313 approx. This was a custom mold made by Lee. Very rare. Have used them in 303 @ 2100fps with no problem @ £85 (I do have a few hundred bullets, some as cast, some sized and gas checked @ 0.310 and some at 0.313)
18. Lee custom mold. 1 cavity for the Swiss Vetterli. 44cal 345 grain. Has 2 base pins – 1 for plain base and the other for hollow base. £65
19. Lee 2 cavity. C312-155-2R gas check. Used one session for approx 100 bullets. Like new. £35
20. Lee 2 cavity C309-120R gas check. Used for one session for approx 100 bullets. Like new. £35
21. Lee 2 cavity 454235 WC. Unusual and rare for webley revolver. Used. £45
22. RCBS mould handles boxed – little use. £35
23.LEM Single cavity hollow base .570 caliber for Enfield/Pratchett. With Handles. Light use in great condition @ £50
24.LEM Single cavity brass mould .450 caliber for Adams revolver. With Handles. Light use in great condition @ £40
25. A Lyman single cavity mould converted to a plain RN 0.510 610gn bullet presumably for patching(?) with handles @ £35
26. A Lyman two cavity mold converted to a plain pointed 0.328 170gn bullet possibly for swaging (?) with handles @ £35
Unless stated none of these come with handles. The Lee 1 and 2 cavity moulds do come with handles. All are used unless stated NEW. All the used moulds work fine.
Getting old!
Can post at cost or meet at Bisley.
1. MP molds 358640 Aluminium 95gn rnfp 8 cavity NEW @ £90
2. MP molds 45-277SAA Brass 2 cavity NEW @ £75
3. MP molds 38HBWC 4 cavity brass – casts @ 0.360 approx – with pins for hollow base or solid base @ £85
4. MP molds 358-165RF gas check 4 cavity brass. Casts @ 0.360 approx @ £85 (I do have gas checks)
5. Saeco 4 cavity steel mold 64409. 41 caliber. Very rare @ £135
6. Lyman 4 cavity steel mold. 358477 PB, SWC, 150gn @ £85
7. Lyman 4 cavity steel mold. 358212 PB, RN, 146gn @ £85
8. Lyman 1 cavity mold. 311334 200gn gc inc approx 65 as cast bullets. @ £50 with or £40 without the bullets.
9. Lyman 1 cavity mold 454613. 265 grain Minie . This is a hollow base mold and comes with handles @ £65
10. Lyman 1 cavity mold. 515141aw PB, FN, 450 gn @ £50
11. Lyman 2 cavity mold. 323470av GC, RN, 165gn @ £50
12. NEI Aluminium 2 cavity mold. 375 277 @ £65
13. NEI Aluminium 2 cavity mold. 475 480 RNFP @ £65
14. NEI Aluminium 2 cavity mold. 390 290 9.5 Turk @ £65
15. NEI Aluminium 1 cavity hollow base mold. 450450. Whitworth mold. With handle @ £85
16. Lee Custom mold. 1 cavity for the Martini Henry. Casts around 0.468 approx 480gn @ £50
17. Lee 6 cavity 30 cal RNFP gas check mold. Approx 180gns. A copy of the RCBS silhouette bullet. Casts @ 0.313 approx. This was a custom mold made by Lee. Very rare. Have used them in 303 @ 2100fps with no problem @ £85 (I do have a few hundred bullets, some as cast, some sized and gas checked @ 0.310 and some at 0.313)
18. Lee custom mold. 1 cavity for the Swiss Vetterli. 44cal 345 grain. Has 2 base pins – 1 for plain base and the other for hollow base. £65
19. Lee 2 cavity. C312-155-2R gas check. Used one session for approx 100 bullets. Like new. £35
20. Lee 2 cavity C309-120R gas check. Used for one session for approx 100 bullets. Like new. £35
21. Lee 2 cavity 454235 WC. Unusual and rare for webley revolver. Used. £45
22. RCBS mould handles boxed – little use. £35
23.LEM Single cavity hollow base .570 caliber for Enfield/Pratchett. With Handles. Light use in great condition @ £50
24.LEM Single cavity brass mould .450 caliber for Adams revolver. With Handles. Light use in great condition @ £40
25. A Lyman single cavity mould converted to a plain RN 0.510 610gn bullet presumably for patching(?) with handles @ £35
26. A Lyman two cavity mold converted to a plain pointed 0.328 170gn bullet possibly for swaging (?) with handles @ £35
Unless stated none of these come with handles. The Lee 1 and 2 cavity moulds do come with handles. All are used unless stated NEW. All the used moulds work fine.